Center CB connector is made from copper. Center brand compression fitting is manufactured in the UK to EN1254-2. Compression fitting create a mechanical joint when tightening the nut, compressing the ring onto the tube. It is compatible with copper tube manufactured to BS EN 1057.

Center CB FF CB compression straight female iron connector 15mm x 1/2"

Compact and lightweight, this Center CB end feed straight adapter with 15mm x 1/2" male connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFCOMI0151/2 end feed male iron connector 15mm x 1/2"

Center CB FF CB compression straight male iron tapered thread connector 15mm x 1/2"

Center CB FF CB compression straight male iron parallel thread connector 15mm x 1/2"

Made of copper, this VSH Xpress S69F/6330G 15mm x 1/2" union connector includes press-fit x BSP parallel female thread end connections and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled correctly but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress straight union female iron connector 15mm x 1/2" Copper

Made of copper, this VSH Xpress S2/6270G 15mm x 1/2" connector incorporates press-fit x BSP parallel female thread end connections and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress straight female connector 15mm x 1/2" Copper

Center CB FF 521 compression straight female iron connector 15mm x 1/2" Chrome Plated

This Wavin Hep2O HX20 15mm x 1/2" tank connector, made of polybutylene (PB) with BSP tail and backnut is designed for cold water use only.

Wavin Hep2O tank connector 15mm x 1/2"

The Endex N2/4270G copper 15mm x 1/2" integral solder ring (ISR) straight female connector is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex straight female iron connector 15mm x 1/2"

Made of copper, the impermeable Yorkshire YP69 integral solder ring (ISR) 15mm x 1/2" straight male iron union connector is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YP69 straight male iron union connector 15mm x 1/2"

This Geberit Mapress 15mm x 1/2" adapter union is made of gunmetal with press-fit x male threaded connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress male iron straight union connector 15mm x 1/2" Copper

The Endex N3/4243G copper 15mm x 1/2" straight male connector is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex straight male iron connector 15mm x 1/2"

Looking for 1/2 inch connector? Order from Wolseley today - free delivery or click and collect available nationwide.

1/2 Inch Connector