Compact and lightweight, this Center CB end feed straight adapter with 15mm x 1/2" female connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFCOFI0151/2 end feed female iron adaptor coupling 15mm x 1/2"

Compact and lightweight, this Center CB end feed metric to imperial coupler with 15mm end feed x 1/2" threaded female connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFCP0151/2 end feed adaptor coupling 15mm x 1/2"

This JET Range BS21 1 x 1/2" reducing coupler is made of 316L stainless steel with BSP threaded end connections.

Ta-Chen BS21 reducer coupling BSP 316 1 x 1/2"

This JET Range BS21 1/2 x 1/4" reducing coupler is made of 316L stainless steel with BSP threaded end connections.

Ta-Chen BS21 reducer coupling BSP 316 1/2 x 1/4"

This Kuterlite K612 15mm x 1/2" coupling with copper x BSP female parallel thread ends is a non-manipulative (Type A) duplex brass compression fitting. It is suitable for use on closed circuit central heating systems, in above ground hot and cold water services, on compressed air lines, in oil and other fluids and in LPG and low pressure gas services. This fitting is made up of a one piece body and includes symmetrical compression rings made of dezincification-resistant alloy and hexagonal duplex brass nuts.

Pegler Kuterlite female coupling 15mm x 1/2"

This JET Range BS21 3/4 x 1/2" reducing coupler is made of 316L stainless steel with BSP threaded end connections.

Ta-Chen BS21 reducer coupling BSP 316 3/4 x 1/2"

This Kuterlite K911X 15mm x 1/2" coupling is made of brass with copper x BSP male tapered connections. The Kuterlite K900/K900-Pro range of non-manipulative (Type A) DZR compression fittings is suitable for jointing plain and chrome-plated copper tube to BS EN 1057, up to 28mm with Tectite PE-X/PE-X pipe to BS 7291 part 3, PB pipe to BS 7291 part 2, XPress carbon system tube/carbon steel tube to EN10305-2 and Tectite 316 system tube or stainless steel to EN 10312. This range is suitable for closed circuit central heating systems, above ground hot and cold water services and compressed air lines and can be used with other fluids and low pressure gas services.

Pegler Kuterlite K911X male coupling 15mm x 1/2"

This Kuterlite K911X 22mm x 1/2" coupling is made of brass with copper x BSP taper male thread connections. The Kuterlite K900/K900-Pro range of non-manipulative (Type A) DZR compression fittings is suitable for jointing plain and chrome-plated copper tube to BS EN 1057, up to 28mm with Tectite PE-X/PE-X pipe to BS 7291 part 3, PB pipe to BS 7291 part 2, XPress carbon system tube/carbon steel tube to EN10305-2 and Tectite 316 system tube or stainless steel to EN 10312. This range is suitable for closed circuit central heating systems, above ground hot and cold water services and compressed air lines and can be used with other fluids and low pressure gas services.

Pegler Kuterlite male coupling 22mm x 1/2"

Made of copper, this 1/2" Lawton Tubes ACR straight coupling includes compression connections and has a seamless, one-piece design for easier use and greater strength.

Lawton Tube ACR copper x copper coupling 1/2"

This Kuterlite K912X 15mm x 1/2" coupling is made of brass with copper x BSP parallel female thread connections. The Kuterlite K900/K900-Pro range of non-manipulative (Type A) DZR compression fittings is suitable for jointing plain and chrome-plated copper tube to BS EN 1057, up to 28mm with Tectite PE-X/PE-X pipe to BS 7291 part 3, PB pipe to BS 7291 part 2, XPress carbon system tube/carbon steel tube to EN10305-2 and Tectite 316 system tube or stainless steel to EN 10312. This range is suitable for closed circuit central heating systems, above ground hot and cold water services and compressed air lines and can be used with other fluids and low pressure gas services.

Looking for 1/2 inch coupling? Order from Wolseley today - free delivery or click and collect available nationwide.

1/2 Inch Coupling