Compact and lightweight, this Center CB end feed reducing tee with 22 x 22 x 15mm female connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFTE0222215 end feed reduced branch tee 22 x 22 x 15mm

Center CB tee is made from copper. Center brand compression fitting is manufactured in the UK to EN1254-2. Compression fitting create a mechanical joint when tightening the nut, compressing the ring onto the tube. It is compatible with copper tube manufactured to BS EN 1057.

Center CB FF CB compression female reduced branch tee 15 x 15 x 1/2"

This Wavin Hep2O HD13 15 x 10 x 15mm 90° branch reduced tee is made from polybutylene (PB) and includes push-fit connections. This fitting is suitable for use in hot and cold flexible push-fit plumbing systems.

Wavin Hep2O reduced branch tee 15 x 15 x 10mm

This Wavin Hep2O HD14 22 x 15 x 15mm 90° branch and one end reduced tee is made from polybutylene (PB) and includes push-fit connections. This fitting is suitable for use in hot and cold flexible push-fit plumbing systems.

Wavin Hep2O end and branch reduced tee 22 x 15 x 15mm

This Wavin Hep2O HD13 22 x 15 x 22mm 90° branch reduced tee is made from polybutylene (PB) and includes push-fit connections. This fitting is suitable for use in hot and cold flexible push-fit plumbing systems.

Wavin Hep2O reduced branch tee 22 x 22 x 15mm

Center CB FF CB compression reduced branch tee 22 x 22 x 15mm

Designed for ease of handling and installation, this Center CB internal solder ring (ISR) 22 x 22 x 15mm reducing tee is lightweight and compact, making it ideal for more challenging installations. The fitting's smooth design minimises flow restrictions and looks neat and tidy on exposed pipelines. Precision-made, an ISR has high quality solder inside each capillary socket, meaning that it's ready to create a reliable joint with no need to end feed.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB-SRTE0222215 integral solder ring reduced branch tee 22 x 22 x 15mm

This Kuterlite K918X 35 x 35 x 15mm reduced branch tee is made of brass with all ends for copper. The Kuterlite K900/K900-Pro range of non-manipulative (Type A) DZR compression fittings is suitable for jointing plain and chrome-plated copper tube to BS EN 1057, up to 28mm with Tectite PE-X/PE-X pipe to BS 7291 part 3, PB pipe to BS 7291 part 2, XPress carbon system tube/carbon steel tube to EN10305-2 and Tectite 316 system tube or stainless steel to EN 10312. This range is suitable for closed circuit central heating systems, above ground hot and cold water services and compressed air lines and can be used with other fluids and low pressure gas services.

Pegler Kuterlite reduced branch tee 35mm x 35mm x 15mm

This Kuterlite K930X 15mm x 15mm x 1/2" branch tee is made of brass with copper x BSP parallel connections.

Pegler Kuterlite female iron reduced branch tee 15mm x 15mm x 1/2"

Center CB FF CB compression reducing branch tee 22 x 15 x 12mm

This VSH Tectite Sprint TT25/TT130 22 x 15 x 22mm 90° reduced tee is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite reduced branch tee 22 x 22 x 15mm

This Geberit Mapress 22 x 15 x 15mm 90° reducer tee is made of copper with press-fit connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress one end and branch reduced tee 22 x 15 x 15mm Copper

Looking for 15 mm branch tee? Order from Wolseley today - free delivery or click and collect available nationwide.

15 Mm Branch Tee