This Wavin Hep2O HD1 15 x 15mm connector is made from polybutylene (PB) and includes push-fit connections. This fitting is suitable for use in hot and cold flexible push-fit plumbing systems.

Wavin Hep2O straight connector 15mm

This John Guest Speedfit 15 x 15mm connector is designed for the connection of plastic and copper pipe. To connect, simply push the bent tap fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Where demounting is required the nut is unlocked and the collet pushed towards the body of the fitting before pulling the pipe to release. This fitting is easy to work with in confined places and removes the need for hot works on site, reducing installation time by about 40% compared to traditional fixing methods.

JG Speedfit PEM0415W straight connector 15mm

Center CB connector is made from copper. Center brand compression fitting is manufactured in the UK to EN1254-2. Compression fitting create a mechanical joint when tightening the nut, compressing the ring onto the tube. It is compatible with copper tube manufactured to BS EN 1057.

Center CB FF CB compression straight female iron connector 15mm x 1/2"

This 316L stainless steel VSH Xpress SS69F 15mm x 1/2" union connector incorporates press-fit x BSP parallel female thread end connections. Optimised for use as part of a system, XPress stainless steel is suitable for potable water applications where water quality and hygiene are vital, in industries such as food, pharmaceuticals and healthcare and in chilled water applications. XPress Stainless provides resistance to RO (reverse osmosis) purified water with a low pH and extremely low dissolved solid content.

Pegler VSH XPress female iron straight connector 15mm x 1/2" Stainless Steel

JG Speedfit straight connector 15mm (Pack of 10)

Center CB FF CB compression female iron straight connector 15mm x 3/4"

This John Guest Speedfit 20 x 15mm PE-copper coupler is a plastic push-fit fitting designed for connection MDPE pipe. Uniquely designed, this fitting incorporates stainless teeth for a tight, secure grip on the pipe, however the connection is demountable if needed, making the system easy to work with in the ground, especially where there is a need to maintain and alter an existing set-up.

JG Speedfit MDPE straight connector 20 x 15mm

Made of copper, the impermeable Yorkshire YP3 integral solder ring (ISR) 15mm x 1/2" male iron straight connector is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YP3 male iron straight connector 15mm x 1/2"

This John Guest Speedfit 25 x 15mm PE-copper coupler is a plastic push-fit fitting designed for connection MDPE pipe. Uniquely designed, this fitting incorporates stainless teeth for a tight, secure grip on the pipe, however the connection is demountable if needed, making the system easy to work with in the ground, especially where there is a need to maintain and alter an existing set-up.

JG Speedfit MDPE straight connector 25 x 15mm

Offering a high quality, neat and professional finish, this Talon Pipe Cover 15mm uPVC straight connector is designed to conceal a join where pipe cover lengths meet.

Talon Pipe Cover straight connector for double cover 15mm

This VSH Tectite 316 TS3/TS243G 15mm x 1/2" connector includes push-fit x BSP tapered male thread end connections. Tectite 316 is a stainless steel option developed specifically for use with the 316 System tube for potable water applications where water quality and hygiene are of utmost importance. The Tectite 316 range includes a stainless steel grab ring designed to grip a stainless steel tube with no need for scribing.

Pegler VSH Tectite male iron straight connector 15mm x 1/2"

This VSH Tectite Pro TX3/TX243G 15mm x 1/2" connector is made of brass with push-fit x BSP tapered male end connections. Tectite fittings from Pegler Yorkshire provide fast, cost-efficient jointing, simply pushing together to create a perfect joint in seconds.

Looking for 15 mm straight connector? Order from Wolseley today - free delivery or click and collect available nationwide.

15 Mm Straight Connector