Center CB coupling is made from copper. Center brand compression fitting is manufactured in the UK to EN1254-2. Compression fitting create a mechanical joint when tightening the nut, compressing the ring onto the tube. It is compatible with copper tube manufactured to BS EN 1057.

Center CB FF CB compression straight coupling 15mm

Compact and lightweight, this Center CB end feed straight coupling with 15mm female connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFCP015 end feed straight coupling 15mm

Made of copper, this VSH Xpress S1/7270 15 x 15mm coupler incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress straight coupling 15mm Copper

Made of copper, the impermeable Yorkshire YPS1 integral solder ring (ISR) 15mm straight coupling is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YPS1 straight coupling 15mm

This Center CB 15 x 15mm compression coupling is made of copper with a chrome finish. Compatible with BS EN 1057 copper tube, a compression fitting creates a mechanical joint when tightening, compressing the ring onto a tube.

Center CB FF 521 compression straight coupling 15mm Chrome Plated

Designed for ease of handling and installation, this Center CB internal solder ring (ISR) 15mm straight coupling is lightweight and compact, making it ideal for more challenging installations. The fitting's smooth design minimises flow restrictions and looks neat and tidy on exposed pipelines. Precision-made, an ISR has high quality solder inside each capillary socket, meaning that it's ready to create a reliable joint with no need to end feed.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB 635809 integral solder ring straight coupling 15mm

This VSH Tectite Sprint TT1/TT270 15 x 15mm coupler is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite straight coupling 15mm

This Geberit Mapress 15 x 15mm coupler is made of copper with press-fit connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress straight coupling 15mm Copper

Made of copper, the impermeable Yorkshire YP1S integral solder ring (ISR) 15mm slip straight coupling is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YP1S slip straight coupling 15mm

This VSH Tectite Classic T1/T270 15 x 15mm coupler is made of brass with push-fit x push-fit end connections. The original Tectite fitting, Tectite Classic is an ideal choice for applications requiring a demountable fitting.

This Kuterlite K610 15 x 15mm straight coupling with copper x copper ends is a non-manipulative (Type A) duplex brass compression fitting. It is suitable for use on closed circuit central heating systems, in above ground hot and cold water services, on compressed air lines, in oil and other fluids and in LPG and low pressure gas services. This fitting is made up of a one piece body and includes symmetrical compression rings made of dezincification-resistant alloy and hexagonal duplex brass nuts.

Pegler Kuterlite straight coupling 15mm

The Endex NS1/5270 copper 15mm straight coupling is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex straight coupling 15mm

Looking for 15 mm straight coupling? Order from Wolseley today - free delivery or click and collect available nationwide.

15 mm Straight Coupling