With an actuating torque of 20Nm, this Belimo SMA-S modulating damper actuator is suitable for adjusting dampers with a cross section of up to 4M² in technical building installations. Offering straightforward direct mounting on the damper shaft using a universal shaft clamp, this actuator is supplied with an anti-rotation device. Measuring voltage U serves the electrical display of the damper position 0.5 - 100% and acts as a slave control signal for additional actuators.

Belimo SMA modulating damper actuator 20nm 150s 95 ip54

Designed for ball valves, this Belimo NR-A rotary actuator with 10Nm actuating torque offers simple, direct mounting using just one central screw. The assembly tool is integrated into the plug-in position indication and mounting orientation is selectable in 90° steps.

Belimo NR-A 3-point open/close rotary actuator 230V

Designed for ball valves, this Belimo LR-A rotary actuator with 5Nm actuating torque offers simple, direct mounting using just one central screw. The assembly tool is integrated into the plug-in position indication and mounting orientation is selectable in 90° steps.

Belimo LR 3-point AC open/close rotary valve actuator 230V 5Nm

Designed for ball valves, this Belimo SRA modulating rotary actuator with 20Nm actuating torque offers simple, direct mounting using just one central screw. The assembly tool is integrated into the plug-in position indication and mounting orientation is selectable in 90° steps. This actuator is connected with a standard modulating signal of 0 - 10 V and drives to the position defined by the positioning signal. Measuring voltage U serves the electrical display of the valve position 0.5 - 100% and acts as a slave control signal for additional actuators.

Belimo SRA rotary valve actuator modulating ac 24v 20nm

With an actuating torque of 20Nm, this Belimo SMA-S damper actuator is suitable for adjusting dampers with a cross section of up to 4M² in technical building installations. Offering straightforward direct mounting on the damper shaft using a universal shaft clamp, this actuator is supplied with an anti-rotation device.

Belimo SMA 3-point open/close damper actuator IP54 20Nm 150s

Supplied with a mounting kit, the Belimo HT 10Nm rotary actuator is suitable for motorisation of the most often used HVAC system mixing valves. The actuator is connected via a standard modulating signal of DC 0 - 10V and drives to the position supplied by the positioning signal.

Belimo HT rotary actuator

Belimo NR-A 3 point open/close actuator 24v 10nm

Designed for ball valves, this Belimo SRA rotary actuator with 20Nm actuating torque offers simple, direct mounting using just one central screw. The assembly tool is integrated into the plug-in position indication and mounting orientation is selectable in 90° steps.

Belimo SRA AC rotary valve actuator open/close 230V 20Nm

Designed for ball valves, this Belimo LR-A modulating rotary actuator with 5Nm actuating torque offers simple, direct mounting using just one central screw. The assembly tool is integrated into the plug-in position indication and mounting orientation is selectable in 90° steps.

Belimo LR rotary valve actuator modulating ad/dc 24v 5nm

Designed for ball valves, this Belimo NR-A rotary actuator with 10Nm actuating torque offers simple, direct mounting using just one central screw. The assembly tool is integrated into the plug-in position indication and mounting orientation is selectable in 90° steps. This actuator is connected with a standard modulating signal of 0 - 10 V and drives to the position defined by the positioning signal. Measuring voltage U serves the electrical display of the valve position 0.5 - 100% and acts as a slave control signal for additional actuators.

Belimo NR-A rotary actuator modulating 24v 10nm

Allowing for the motorisation of most commonly used HVAC system mixing valves, the Belimo HT 10Nm rotary actuator for NR230-S is activated via a three point signal. Easy to install, this actuator is supplied with a mounting kit and a connecting cable.

Belimo HT rotary actuator for NR230-S

With an actuating torque of 20Nm, this Belimo SMA-S modulating damper actuator is suitable for adjusting dampers with a cross section of up to 4M² in technical building installations. Offering straightforward direct mounting on the damper shaft using a universal shaft clamp, this actuator is supplied with an anti-rotation device.

Belimo SMA adjustable modulating damper actuator IP54 20Nm 150s

Looking for belimo actuator? Order from Wolseley today - free delivery or click and collect available nationwide.

Belimo Actuator