Installed into the suction line of refrigeration systems, this Danfoss KVL15 crankcase pressure regulator protects a compressor motor against the overload that can occur during start-up after long off periods or just after a defrost. It incorporates 5/8" solder ODF connections.

Danfoss KVL15 solder crank case pressure regulator 5/8"

Installed into the suction line of refrigeration systems, this Danfoss KVL28 crankcase pressure regulator protects a compressor motor against the overload that can occur during start-up after long off periods or just after a defrost. It incorporates 1 1/8" solder ODF connections.

Danfoss KVL28 solder crank case pressure regulator 1.1/8"

Installed into the suction line of refrigeration systems, this Danfoss KVL12 crankcase pressure regulator protects a compressor motor against the overload that can occur during start-up after long off periods or just after a defrost. It incorporates 1/2" solder ODF connections.

Danfoss KVL12 solder crank case pressure regulator 1/2"

Intended to be mounted in the suction line after the evaporator, this Danfoss KVP22 evaporator pressure regulator with 7/8" solder ODF connections maintains a constant evaporating pressure and, in turn, ensures a constant surface temperature on the evaporator. With modulating regulation, the regulator throttles the suction line, matching refrigerant gas to the evaporator load. Closing when pressure inside the evaporator falls below a set value, this valve ensures that pressure doesn't fall to a lower level than required. It can allow for differentiation between evaporating pressures in two or more evaporators in a single compressor system.

Danfoss KVP22 solder evaporator pressure regulator 7/8"

Intended to be mounted in the suction line after the evaporator, this Danfoss KVP22 evaporator pressure regulator with 5/8" solder ODF connections maintains a constant evaporating pressure and, in turn, ensures a constant surface temperature on the evaporator. With modulating regulation, the regulator throttles the suction line, matching refrigerant gas to the evaporator load. Closing when pressure inside the evaporator falls below a set value, this valve ensures that pressure doesn't fall to a lower level than required. It can allow for differentiation between evaporating pressures in two or more evaporators in a single compressor system.

Danfoss KVP15 solder evaporator pressure regulator 5/8"

Installed into the suction line of refrigeration systems, this Danfoss KVL35 crankcase pressure regulator protects a compressor motor against the overload that can occur during start-up after long off periods or just after a defrost. It incorporates 1 3/8" solder ODF connections.

Danfoss KVL35 solder crank case pressure regulator 1.3/8"

Looking for danfoss pressure regulator? Order from Wolseley today - free delivery or click and collect available nationwide.

Danfoss Pressure Regulator