Made of high density polyethylene (HDPE), this Geberit HDPE straight connector with ring seal socket for wall-hung WCs, incorporating 90mm push-fit x plain end connections, is suitable for a range of uses in building and roof drainage in industrial, commercial and laboratory settings and can be installed in-ground, in concrete or during bridge construction. This fitting is additionally suitable for conventional or siphonic roof drainage systems and in land drainage systems.

Geberit HDPE HDPE duofix straight connector 90mm

Made of high density polyethylene (HDPE), this Geberit HDPE straight connector with ring seal socket for wall-hung WCs, incorporating 110 x 90mm push-fit x plain end connections, is suitable for a range of uses in building and roof drainage in industrial, commercial and laboratory settings and can be installed in-ground, in concrete or during bridge construction. This fitting is additionally suitable for conventional or siphonic roof drainage systems and in land drainage systems.

Geberit HDPE HDPE duofix straight connector 110mm

Made of high density polyethylene (HDPE), this Geberit HDPE extended WC collar with fastening material and 90mm push-fit x plain end connections is suitable for a range of uses in building and roof drainage in industrial, commercial and laboratory settings and can be installed in-ground, in concrete or during bridge construction. This fitting is additionally suitable for conventional or siphonic roof drainage systems and in land drainage systems.

Geberit HDPE HDPE straight WC connector with flush pipe 90mm

This Geberit Mapress 54mm x 2" adapter is made of stainless steel with press-fit x male thread connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, saturated steam less than or equal to120°C, service water, treated water, rainwater with a pH value of greater than6, grey or black water with pH value greater than6, extinguishing water (wet), sprinklers (wet), chemicals/technical liquids, compressed air (oil purity class 0-3), negative pressure, inert gases such as nitrogen, industrial gases including acetylene and shielding gases and in technical building systems, industry and shipbuilding.

Geberit Mapress male iron straight connector 54mm x 2" Stainless Steel

Made of carbon steel, this Geberit Mapress 28mm x 1" straight connector incorporates press-fit to male thread end connections.This fitting is suitable for use with heating water, cooling water with or without anti-freeze agent, with remote network heating water 120°C and extinguishing water (wet). It is also suitable for sprinklers (wet), compressed air (oil purity class 3) and inert gases including nitrogen. It is ideal for technical building systems, industry and shipbuilding applications.Geberit Mapress carbon steel pressing systems offer a high quality and economical alternative to welded, soldered or screwed piping systems.

Geberit Mapress 21708 male iron straight connector 28mm x 1" Carbon Steel

This Geberit Mapress 28mm x 1" adapter is made of stainless steel with press-fit x male thread connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, saturated steam less than or equal to120°C, service water, treated water, rainwater with a pH value of greater than6, grey or black water with pH value greater than6, extinguishing water (wet), sprinklers (wet), chemicals/technical liquids, compressed air (oil purity class 0-3), negative pressure, inert gases such as nitrogen, industrial gases including acetylene and shielding gases and in technical building systems, industry and shipbuilding.

Geberit Mapress male iron straight connector 28mm x 1" Stainless Steel

This Geberit Mapress 22mm x 3/4" adapter is made of stainless steel with press-fit x male thread connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, saturated steam less than or equal to120°C, service water, treated water, rainwater with a pH value of greater than6, grey or black water with pH value greater than6, extinguishing water (wet), sprinklers (wet), chemicals/technical liquids, compressed air (oil purity class 0-3), negative pressure, inert gases such as nitrogen, industrial gases including acetylene and shielding gases and in technical building systems, industry and shipbuilding.

Geberit Mapress male iron straight connector 22mm x 3/4" Stainless Steel

This Geberit Mapress 22mm x 3/4" adapter is made of stainless steel with press-fit x female thread connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, saturated steam less than or equal to120°C, service water, treated water, rainwater with a pH value of greater than6, grey or black water with pH value greater than6, extinguishing water (wet), sprinklers (wet), chemicals/technical liquids, compressed air (oil purity class 0-3), negative pressure, inert gases such as nitrogen, industrial gases including acetylene and shielding gases and in technical building systems, industry and shipbuilding.

Geberit Mapress female iron straight connector 22mm x 3/4" Stainless Steel

Made of carbon steel, this Geberit Mapress 54mm x 2" straight connector incorporates press-fit to male thread connections.This fitting is suitable for use with heating water, cooling water with or without anti-freeze agent, with remote network heating water 120°C and extinguishing water (wet). It is also suitable for sprinklers (wet), compressed air (oil purity class 3) and inert gases including nitrogen. It is ideal for technical building systems, industry and shipbuilding applications.Geberit Mapress carbon steel pressing systems offer a high quality and economical alternative to welded, soldered or screwed piping systems.

Geberit Mapress 21711 male iron straight connector 54mm x 2" Carbon Steel

Made of carbon steel, this Geberit Mapress 15mm x 1/2" straight connector incorporates press-fit to male thread end connections.This fitting is suitable for use with heating water, cooling water with or without anti-freeze agent, with remote network heating water 120°C and extinguishing water (wet). It is also suitable for sprinklers (wet), compressed air (oil purity class 3) and inert gases including nitrogen. It is ideal for technical building systems, industry and shipbuilding applications.Geberit Mapress carbon steel pressing systems offer a high quality and economical alternative to welded, soldered or screwed piping systems.

Geberit Mapress 21703 male iron straight connector 15mm x 1/2" Carbon Steel

This Geberit Mapress 28mm x 1" adapter is made of stainless steel with press-fit x female thread connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, saturated steam less than or equal to120°C, service water, treated water, rainwater with a pH value of greater than6, grey or black water with pH value greater than6, extinguishing water (wet), sprinklers (wet), chemicals/technical liquids, compressed air (oil purity class 0-3), negative pressure, inert gases such as nitrogen, industrial gases including acetylene and shielding gases and in technical building systems, industry and shipbuilding.

Geberit Mapress female iron straight connector 28mm x 1" Stainless Steel

This Geberit Mapress 15mm x 1/2" adapter is made of stainless steel with press-fit x male thread connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, saturated steam less than or equal to120°C, service water, treated water, rainwater with a pH value of greater than6, grey or black water with pH value greater than6, extinguishing water (wet), sprinklers (wet), chemicals/technical liquids, compressed air (oil purity class 0-3), negative pressure, inert gases such as nitrogen, industrial gases including acetylene and shielding gases and in technical building systems, industry and shipbuilding.

Geberit Mapress male iron straight connector 15mm x 1/2" Stainless Steel

Looking for geberit straight connector? Order from Wolseley today - free delivery or click and collect available nationwide.

Geberit Straight Connector