Center CB elbow is made from copper. Center brand compression fitting is manufactured in the UK to EN1254-2. Compression fitting create a mechanical joint when tightening the nut, compressing the ring onto the tube. It is compatible with copper tube manufactured to BS EN 1057.

Center CB FF 521 compression male iron elbow 15mm x 1/2" Chrome Plated

The Endex N12S/5092 copper 22mm x 3/4" 90° male elbow is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex 90deg male iron elbow 22mm x 3/4"

The Yorkshire YP13 integral solder ring (ISR) 15mm x 1/2" male elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YP13 male iron elbow 15mm x 1/2"

Made of copper, this VSH Xpress S13/6092G 15mm x 1/2" 90° elbow incorporates press-fit x BSP tapered male end connections and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress male iron elbow 15mm x 1/2" Copper

This Georg Fischer GF-92 1/2 x 1/2" 90° elbow is made of malleable cast iron and incorporates BSP tapered connections. Durable and highly resistant to mechanical stress and temperatures, this fitting is safe for use in a wide range of settings and offers universal, standardised thread jointing technology. With full end load capability, this fitting ensures fast and reliable connection of steel, PE, lead and butt-weld steel pipes.

Georg Fischer GF-92 90deg male x female galvanised elbow 1/2"

This Crane 152 90° elbow is made of malleable iron with 1/2 x 1/2" BSP tapered connections. This fitting is suitable for use in sprinkler systems, chilled or heating water, natural gas, compressed air, hot water and steam and fuel transfer.

Crane 152G galvanised malleable male x female elbow 1/2"

This Crane 152 90° elbow is made of malleable iron with 3/8 x 3/8" BSP tapered connections. This fitting is suitable for use in sprinkler systems, chilled or heating water, natural gas, compressed air, hot water and steam and fuel transfer.

Crane 152G galvanised malleable male x female elbow 3/8"

Fitted with male BSP threaded connections, this CPE 90° 1" elbow is a malleable iron pipe fitting designed for reliable use in medium and low pressure pipelines.

Continental CPE-94 malleable male to male elbow 90 degree 1" Black

This Crane 152 90° elbow is made of malleable iron with 3/4 x 3/4" BSP tapered connections. This fitting is suitable for use in sprinkler systems, chilled or heating water, natural gas, compressed air, hot water and steam and fuel transfer.

Crane 152 152B malleable male x female elbow 3/4" Black

This Georg Fischer GF-92 1 x 1" 90° elbow is made of malleable cast iron and incorporates BSP tapered connections. Durable and highly resistant to mechanical stress and temperatures, this fitting is safe for use in a wide range of settings and offers universal, standardised thread jointing technology. With full end load capability, this fitting ensures fast and reliable connection of steel, PE, lead and butt-weld steel pipes.

Georg Fischer GF-92 90deg male x female galvanised elbow 1"

This Georg Fischer GF-92 3/4 x 3/4" 90° elbow is made of malleable cast iron and incorporates BSP tapered connections. Durable and highly resistant to mechanical stress and temperatures, this fitting is safe for use in a wide range of settings and offers universal, standardised thread jointing technology. With full end load capability, this fitting ensures fast and reliable connection of steel, PE, lead and butt-weld steel pipes.

Georg Fischer GF-92 90deg male x female galvanised elbow 3/4"

Crane 152G galvanised malleable male x female elbow 3/4"

Looking for iron male elbow? Order from Wolseley today - free delivery or click and collect available nationwide.

Iron Male Elbow