Made of copper, this VSH Xpress S12/7002A 15 x 15mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 15mm Copper

Made of copper, this VSH Xpress S12S/7001A 15 x 15mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 15mm Copper

This VSH Tectite Classic T12/T090 15 x 15mm 90° elbow is made of brass with push-fit x push-fit end connections. The original Tectite fitting, Tectite Classic is an ideal choice for applications requiring a demountable fitting.

Pegler VSH Tectite Classic T12 90° elbow 15mm

This VSH Tectite Sprint TT12/TT090 15 x 15mm 90° elbow is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT12 90° elbow 15mm

The Yorkshire YPS12 integral solder ring (ISR) 15mm 90° elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YPS12 90° elbow 15mm

Made of copper, this VSH Xpress S21/7041 15 x 15mm 45° obtuse elbow with press-fit connections incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S21 45° elbow 15mm Copper

The Yorkshire YPS12S integral solder ring (ISR) 15mm 90° street elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YPS12S 90° street elbow 15mm

This Kuterlite K617W 15mm x 1/2" 90° elbow is a non-manipulative (Type A) duplex brass compression fitting. It is suitable for use on closed circuit central heating systems, in above ground hot and cold water services, on compressed air lines, in oil and other fluids and in LPG and low pressure gas services. This fitting is made up of a one piece body and includes symmetrical compression rings made of dezincification-resistant alloy and hexagonal duplex brass nuts.

Pegler Kuterlite K617W backplate elbow 15mm x 1/2in

This VSH Tectite Sprint TT21/TT041 15 x 15mm 45° obtuse elbow is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT21 45° elbow 15mm

This VSH Tectite Sprint TT12S/TT092 15 x 15mm 90° street elbow is made of copper with push-fit x male end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT12S 90° street elbow 15mm

The Yorkshire YP21 integral solder ring (ISR) 15mm 45° obtuse elbow is made of gunmetal. This impermeable fitting provides protection against water supply contaminants. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YP21 45° elbow 15mm

Made of copper, this VSH Xpress S21S/7040 15 x 15mm 45° obtuse street elbow with press-fit x male end connections incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S21S 45° street elbow 15mm Copper

Looking for pegler 15 mm elbow? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler 15 Mm Elbow