Made of copper, this VSH Xpress S12S/7001A 15 x 15mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 15mm Copper

Made of copper, this VSH Xpress S12/7002A 15 x 15mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 15mm Copper

Made of copper, this VSH Xpress S12/7002A 22 x 22mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 22mm Copper

The Yorkshire YPS12 integral solder ring (ISR) 22mm 90° elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YPS12 90° elbow 22mm

This VSH Tectite Sprint TT12/TT090 15 x 15mm 90° elbow is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT12 90° elbow 15mm

Made of copper, this VSH Xpress S12/7002A 28 x 28mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 28mm Copper

Made of copper, this VSH Xpress S12/7002A 35 x 35mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 35mm Copper

Made of copper, this VSH Xpress S12/7002A 54 x 54mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 54mm Copper

Made of copper, this VSH Xpress S12/7002A 42 x 42mm 90° elbow incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12 90° elbow 42mm Copper

The Yorkshire YPS12 integral solder ring (ISR) 15mm 90° elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YPS12 90° elbow 15mm

This VSH Tectite Classic T12/T090 15 x 15mm 90° elbow is made of brass with push-fit x push-fit end connections. The original Tectite fitting, Tectite Classic is an ideal choice for applications requiring a demountable fitting.

Pegler VSH Tectite Classic T12 90° elbow 15mm

This VSH Tectite Sprint TT12/TT090 22 x 22mm 90° elbow is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT12 90° elbow 22mm

Looking for pegler 90 degree elbow? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler 90 Degree Elbow