The Yorkshire YP3LC 15mm x 1/4" male reducing connector is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire male iron reducing connector 15mm x 1/4"

Made of copper, this VSH Xpress S2/6270G 28mm x 1" connector incorporates press-fit x BSP parallel female thread end connections and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S2 straight female connector 28mm x 1in Copper

Made of copper, this VSH Xpress S69/6331G 54mm x 2" union connector with press-fit x BSP taper male thread connections incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S69 male straight union connector 54mm x 2in Copper

Made of copper, this VSH Xpress S69F/6330G 35mm x 1 1/4" union connector includes press-fit x BSP parallel female thread end connections and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled correctly but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S69F female straight union connector 35mm x 1.1/4in Copper

Made of copper, this VSH Xpress S69/6331G 35mm x 1 1/4" union connector with press-fit x BSP taper male thread connections incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S69 male straight union connector 35mm x 1.1/4in Copper

Made of copper, the impermeable Yorkshire YP2 integral solder ring (ISR) 42mm x 1 1/2" female iron straight connector is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YP2 straight female connector 42mm x 1.1/2in

Pegler is well known and respected as one of the leading manufacturers of advanced plumbing, heating and engineering products in the world. Our success has been derived from a commitment to a philosophy based on quality, service, investment, competitiveness and innovation. Energy and water conservation is very much at the forefront of our product development. Peglers' unique Integrated Piping System (IPS) brings together valves, fitting and pipes in one complete pipe-work system, with an emphasis on delivering heat free jointing. IPS combines the best elements of modern connection and valve technology, with international quality approvals and cost effective solutions for every project. Pegler is totally committed to Quality and prides itself on being one of the first manufacturers in the UK to gain BS5750 certification for Quality Assurance and has subsequently gained BS EN ISO 9001:2000.

Pegler VSH XPress straight female connector 64mm x 2.1/2''

Made of copper, the impermeable Yorkshire YP69 integral solder ring (ISR) 15mm x 1/2" straight male iron union connector is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YP69 straight male union connector 15mm x 1/2in

The Endex N2/4270G copper 22mm x 3/4" integral solder ring (ISR) straight female connector is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex N2 straight female connector 22mm x 3/4in

Made of copper, this VSH Xpress S69/6331G 28mm x 1" union connector with press-fit x BSP taper male thread connections incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S69 male straight union connector 28mm x 1in Copper

The Yorkshire YP69 integral solder ring (ISR) 42mm x 1 1/2" straight male union connector is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YP69 straight male union connector 42mm x 1.1/2in

The Endex N2/4270G copper 35mm x 1 1/4" integral solder ring (ISR) straight female connector is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex N2 straight female connector 35mm x 1.1/4in

Looking for pegler connector? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler Connector