Made of copper, this VSH Xpress S6/7243 66.7 x 28mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 67 x 28mm Copper

Made of copper, this VSH Xpress S6/7243 22 x 15mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 22 x 15mm Copper

Made of copper, this VSH Xpress S6/7243 28 x 22mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 28 x 22mm Copper

This VSH Xpress SG6/G7243 22 x 15mm reducer with larger end male for insertion into fitting x press-fit end connections is designed for use with copper tube to BS EN 1057 in either internal or external above ground second and third family gas services. Made from copper, this XPress fitting includes a yellow hydrogenated acrylonitrite butadiene rubber (HNBR) O-ring and has been permanently marked with a highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG6 gas reducer 22 x 15mm Copper

Made of copper, this VSH Xpress S6/7243 28 x 15mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 28 x 15mm Copper

Made of copper, this VSH Xpress S6/7243 54 x 42mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 54 x 42mm Copper

Made of copper, this VSH Xpress S6/7243 35 x 28mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 35 x 28mm Copper

Made of copper, this VSH Xpress S6/7243 35 x 22mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 35 x 22mm Copper

This VSH Xpress SG6/G7243 28 x 22mm reducer with larger end male for insertion into fitting x press-fit end connections is designed for use with copper tube to BS EN 1057 in either internal or external above ground second and third family gas services. Made from copper, this XPress fitting includes a yellow hydrogenated acrylonitrite butadiene rubber (HNBR) O-ring and has been permanently marked with a highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG6 gas reducer 28 x 22mm Copper

This VSH Tectite Sprint TT6/TT243 22 x 15mm reducer is made of copper with push-fit x larger male end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT6 reducer 22 x 15mm

Made of copper, this VSH Xpress S6/7243 54 x 28mm reducer with larger end male x press-fit for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S6 reducer 54 x 28mm Copper

Made of copper, the impermeable Yorkshire YPS6 integral solder ring (ISR) 22 x 15mm reducer is corrosion-resistant and protects against water supply contaminants for reliably long lasting use in plumbing systems which are expected to last as long as the buildings they're installed in. Suitable for jointing copper tubes to BS EN 1057 (R220, R250 and R290), this ISR fitting can be used in a wide range of applications.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint..

Pegler Yorkshire YPS6 reducer 22 x 15mm

Looking for pegler reducer? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler Reducer