Part of a versatile general range, this Endex N61/5301 copper 28mm stop end joints copper tube manufactured to BS EN 1057 using soft or hard solder. Suitable for use in above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems, this end feed fitting can also be used in low-pressure steam heating and pressurised unvented heating systems. Suitable for sanitation services and compressed air lines as well as gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, it also offers compatibility with engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principle of capillary action. When heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint.

Pegler Endex N61 stop end 28mm

Part of a versatile general range, this Endex N61/5301 copper 15mm stop end joints copper tube manufactured to BS EN 1057 using soft or hard solder. Suitable for use in above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems, this end feed fitting can also be used in low-pressure steam heating and pressurised unvented heating systems. Suitable for sanitation services and compressed air lines as well as gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, it also offers compatibility with engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principle of capillary action. When heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint.

Pegler Endex N61 stop end 15mm

Part of a versatile general range, this Endex N61/5301 copper 22mm stop end joints copper tube manufactured to BS EN 1057 using soft or hard solder. Suitable for use in above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems, this end feed fitting can also be used in low-pressure steam heating and pressurised unvented heating systems. Suitable for sanitation services and compressed air lines as well as gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, it also offers compatibility with engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principle of capillary action. When heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between tube and fitting for a tough, reliable joint.

Pegler Endex N61 stop end 22mm

Designed for use on copper tube, this VSH Xpress S61/7301 22mm stop end in copper uses Leak Before Press technology, developed to provide instant identification of joints that are assembled correctly but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S61 stop end 22mm Copper

Designed for use on copper tube, this VSH Xpress S61/7301 15mm stop end in copper uses Leak Before Press technology, developed to provide instant identification of joints that are assembled correctly but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S61 stop end 15mm Copper

Suitable for use on a range of tube types, this non-demountable VSH Tectite Sprint TT61/TT301 22mm stop end is made of copper and has simple push-fit connections. Offering fast, efficient jointing without hot works, Tectite Sprint fittings are easy to insulate, have a low profile design and are suitable for use in confined spaces.

Pegler VSH Tectite Sprint TT61 stop end 22mm

Designed for use on copper tube, this VSH Xpress S61/7301 28mm stop end in copper uses Leak Before Press technology, developed to provide instant identification of joints that are assembled correctly but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S61 stop end 28mm Copper

Suitable for use on a range of tube types, this non-demountable VSH Tectite Sprint TT61/TT301 15mm stop end is made of copper and has simple push-fit connections. Offering fast, efficient jointing without hot works, Tectite Sprint fittings are easy to insulate, have a low profile design and are suitable for use in confined spaces.

Pegler VSH Tectite Sprint TT61 stop end 15mm

Pegler is well known and respected as one of the leading manufacturers of advanced plumbing, heating and engineering products in the world. Our success has been derived from a commitment to a philosophy based on quality, service, investment, competitiveness and innovation. Energy and water conservation is very much at the forefront of our product development. Peglers' unique Integrated Piping System (IPS) brings together valves, fitting and pipes in one complete pipe-work system, with an emphasis on delivering heat free jointing. IPS combines the best elements of modern connection and valve technology, with international quality approvals and cost effective solutions for every project. Pegler is totally committed to Quality and prides itself on being one of the first manufacturers in the UK to gain BS5750 certification for Quality Assurance and has subsequently gained BS EN ISO 9001:2000.

Pegler VSH XPress stop end 67mm Copper

Designed for use on copper tube to BS EN 1057, this VSH Xpress SG61/G7301 22mm stop end is suitable for either internal or external above ground second and third family gas services. Made from copper, this fitting has a yellow hydrogenated acrylonitrile butadiene rubber (HNBR) O-ring and a permanent, highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG61 gas stop end 22mm Copper

Designed for use on copper tube to BS EN 1057, this VSH Xpress SG61/G7301 15mm stop end is suitable for either internal or external above ground second and third family gas services. Made from copper, this fitting has a yellow hydrogenated acrylonitrile butadiene rubber (HNBR) O-ring and a permanent, highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG61 gas stop end 15mm Copper

Made of DZR brass, this VSH Tectite Classic T61/T301 15mm stop end has push-fit end connections for use on a range of tube types. Suitable for heating and hot and cold water services, Tectite Classic  fittings are fully demountable.

Pegler VSH Tectite Classic T61 stop end 15mm

Looking for pegler stop end? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler Stop End