Made of copper, this VSH Xpress S12S/7001A 15 x 15mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 15mm Copper

Made of copper, this VSH Xpress S12S/7001A 22 x 22mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 22mm Copper

Made of copper, this VSH Xpress S12S/7001A 28 x 28mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 28mm Copper

This VSH Tectite Sprint TT12S/TT092 15 x 15mm 90° street elbow is made of copper with push-fit x male end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT12S 90° street elbow 15mm

This VSH Tectite Sprint TT12S/TT092 22 x 22mm 90° street elbow is made of copper with push-fit x male end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT12S 90° street elbow 22mm

The Yorkshire YPS12S integral solder ring (ISR) 15mm 90° street elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YPS12S 90° street elbow 15mm

This VSH Tectite Sprint TT21S/TT040 15 x 15mm 45° obtuse street elbow is made of copper with push-fit x male end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT21S 45° street elbow 15mm

Made of copper, this VSH Xpress S12S/7001A 42 x 42mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 42mm Copper

This VSH Xpress SG12S/G7001A 15 x 15mm 90° street elbow with press-fit x male insertion end connections is designed for use with copper tube to BS EN 1057 in either internal or external above ground second and third family gas services. Made from copper, this XPress fitting includes a yellow hydrogenated acrylonitrite butadiene rubber (HNBR) O-ring and has been permanently marked with a highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG12S 90° gas street elbow 15mm Copper

The Endex N21S/5040 copper 22mm 45° obtuse street elbow is part of the brand's highly versatile general range. This end feed fitting joints copper tube manufactured to BS EN 1057 using soft or hard solder (brazing alloy) and is suitable for above ground hot and cold domestic or potable water services in small bore and mini bore central heating systems and low-pressure steam heating and pressurised unvented heating systems. It is equally suitable for sanitation services and compressed air lines, gas distribution systems for natural and manufactured gases, fuel oils (hard solder only) and kerosene, and engineering pipeline services that convey liquids, oils, air and gases at temperatures up to 110°C. A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Endex N21S 45° street elbow 22mm

The Yorkshire YP12S integral solder ring (ISR) 22mm 90° street elbow is made of copper. This impermeable fitting provides protection against water supply contaminants and resists corrosion for reliable use in plumbing systems with properly installed systems expected to outlast the buildings in which they are installed. Suitable for use in a wide range of applications, this fitting incorporates an integral solder ring and has been designed for jointing copper tubes to BS EN 1057 (R220, R250 and R290). A solder joint is created through the principal of capillary action, when the fitting and tube is assembled and heated to the appropriate temperature, solder becomes molten and is drawn into the gap between tube and fitting for a durably reliable joint.

Pegler Yorkshire YP12S 90° street elbow 22mm

Made of copper, this VSH Xpress S12S/7001A 54 x 54mm 90° street elbow incorporates press-fit x male end connections for insertion and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S12S 90° street elbow 54mm Copper

Looking for pegler street elbow? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler Street Elbow