Made of copper, this VSH Xpress S24/7130 15 x 15 x 15mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S24 equal tee 15mm Copper

Made of copper, this VSH Xpress S24/7130 66.7 x 66.7 x 66.7mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S24A equal tee 67mm Copper

Made of copper, this VSH Xpress S24/7130 22 x 22 x 22mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S24 equal tee 22mm Copper

This VSH Tectite Sprint TT24/TT130 15 x 15 x 15mm 90° tee is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT24 equal tee 15mm

Made of copper, this VSH Xpress S24/7130 28 x 28 x 28mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S24 equal tee 28mm Copper

Made of copper, this VSH Xpress S24/7130 35 x 35 x 35mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S24 equal tee 35mm Copper

Made of copper, this VSH Xpress S24/7130 54 x 54 x 54mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S24 equal tee 54mm Copper

This VSH Xpress SG24/G7130 28 x 28 x 28mm 90° tee with press-fit connections is designed for use with copper tube to BS EN 1057 in either internal or external above ground second and third family gas services. Made from copper, this XPress fitting includes a yellow hydrogenated acrylonitrite butadiene rubber (HNBR) O-ring and has been permanently marked with a highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG24 equal tee gas 28mm Copper

This VSH Xpress SG25/G7130 22 x 15 x 22mm 90° reduced tee with press-fit connections is designed for use with copper tube to BS EN 1057 in either internal or external above ground second and third family gas services. Made from copper, this XPress fitting includes a yellow hydrogenated acrylonitrite butadiene rubber (HNBR) O-ring and has been permanently marked with a highly visibility yellow 'Gas/PN5 GT/1' marking.

Pegler VSH XPress SG25 gas reducing tee 22 x 22 x 15mm Copper

This VSH Tectite Sprint TT24/TT130 22 x 22 x 22mm 90° tee is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT24 equal tee 22mm

This VSH Tectite Sprint TT26/TT130 22 x 22 x 15mm 90° reduced tee is made of copper with push-fit end connections. Tectite Sprint non-demountable fittings offer quick and efficient jointing with no need for heat. Tectite fittings have a smart low profile design and are easily installed in confined spaces, they're also simple to insulate.

Pegler VSH Tectite Sprint TT25 one end reducing tee 22 x 15 x 22mm

Made of copper, this VSH Xpress S26/7130 28 x 28 x 15mm 90° reduced tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress S26 reducing tee 28 x 15 x 28mm Copper

Looking for pegler tee? Order from Wolseley today - free delivery or click and collect available nationwide.

Pegler Tee