TP 90 ° Tee 2 in, RB0TIL630

TP 90 ° Tee 1-1/2 in, RB0TIL500

TP 90 ° Tee 3/4 x 3/4 x 3/4 in, RV0TIL250

TP 90 ° Tee 2 x 2 x 2 in, RV0TIL630

TP 90 ° Tee 1-1/4 in, RB0TIL400

Geberit FlowFit Press-Fit Tee 90 ° 16 mm Black 620.080.00.1

TP 90 ° Tee 1 x 1 x 1 in, RV0TIL320

Durapipe SuperFlo 90 ° Tee 63 mm, 11122311

TP 90 ° Tee 3 x 3 x 3 in, RV0TIL900

TP 90 ° Tee 1 in, RB0TIL320

Geberit FlowFit Press-Fit Tee 90 ° 40 mm Black 620.084.00.1

Geberit FlowFit Press-Fit Tee 90 ° 25 mm Black 620.082.00.1

We have a wide range of Tees available online at Wolseley. Visit us to order Pressure Plastic Pipe Fittings today and collect from 600 nationwide locations

Tees | Pressure Plastic Pipe Fittings | Wolseley

This tee is a 90° ABS fitting designed for joining waste pipe runs in plumbing systems. It provides a right-angled branching point for small-diameter drainage and waste networks and is intended for solvent-weld assembly with compatible pipework. The component is ...

Polypipe Solvent Weld Tee 90 ° 21.5 mm

This tee is a 50mm waste pipe fitting designed to join ABS solvent-weld drainage runs at an offset junction in plumbing installations. Manufactured in ABS material and finished in black, it provides a fixed-angle connection for solvent-weld assembly on compatible ...

Wavin Solvent Weld Tee 87.5 ° 50 mm

This swept tee is a sanitary ABS fitting designed to manage waste flow within drainage systems. It joins three 32mm solvent-weld pipes at a swept junction, creating a smooth change of direction at approximately 92.5° to facilitate consistent discharge. Supplied ...

Polypipe Solvent Weld Swept Tee 92.5 ° 32